Coating Corrosion Electrolytic Cell

Coating corrosion electrochemical cell

1. The main body of the cell is made of borosilicate glass.

2. The working electrode of the electrolytic cell is sheet working electrode, which is simple to install, easy to remove and easy to handle.

3. The electrolytic cell can be used for electrochemical experiments of samples before electron microscope scanning, or for corrosion testing of coating corrosion performance.

4. The bottom of the electrolytic cell has a circular hole with a fixed area of 1 square centimeter (the required size can be customized according to requirements) and 0 rings that can be used for sealing. After placing the sample at the circular hole, adjust and tighten the four screws at the top of the cell body, o that the sample will be pressed tightly to achieve sealing effect.

5. The conductive link of the working electrode of the electrolytic cell adopts the principle of adhering copper tape to the working sample sheet for conducting the sample sheet. The copper tape is convenient to use and easy to replace after corrosion, which can better guarantee the conductivity.

6. The electrolytic cell is divided into single layer and double layer. On the basis of single layer, the double layer adds the function of constant temperature water bath.

7. electrolytic cell cover material: Teflon.


*The electrode shown is for display. The actual price does not include any electrode, please order separately。